Home / Burst pipe repair cost / Fort Worth, TX
Cost by city
Burst pipe repair cost in Fort Worth, TX (2026)
The short answer
Repairing a burst pipe in Fort Worth typically costs $475 to $1,900 for the plumbing work alone, or about $150 to $240 per linear foot, with water damage cleanup adding $1,000 to $5,000 or more on top. Fort Worth averages about 29 nights per year below freezing, roughly twice San Antonio’s exposure, and Winter Storm Uri in February 2021 is the benchmark catastrophe for the area. These are our national burst pipe figures adjusted for local plumber wages. See how we localize a range.
Fort Worth burst pipe cost by scenario
| Job | Typical cost | Notes |
|---|---|---|
| Accessible burst supply pipe | $475–$1,900 | National $500–$2,000 at the local wage index (0.96) |
| Repair priced per linear foot | $150–$240 | National $150–$250 at the local wage index |
| Emergency service fee | $100–$300 | Flat trip fee, on top of labor; same as national |
| After-hours or weekend rate | 1.5x–2x | Multiplier on base labor rate; can run higher during a regional freeze event |
| Frozen pipe repair after thaw | $150–$475 | National $150–$500 at the local wage index |
| Water damage cleanup | $1,000–$5,000+ | Separate from the plumbing fix; often the larger cost |
| Whole-house repipe (recurring bursts) | $3,800–$14,400 | National $4,000–$15,000 when patching stops paying off |
Sources: National burst pipe ranges (our parent page), NOAA/NCEI 1991-2020 normals, DFW station USW00003927, monthly average days with minimum temp below 32 F. Figures are 2026 national ranges and vary by region, scope, and access.
Local burst pipe pricing is rarely published by Fort Worth plumbers. These figures are the national cited ranges multiplied by the local wage index. The emergency multiplier and water damage costs are the same everywhere; the wage index adjusts only the base labor rate.
Why Fort Worth burst pipe costs differ
Fort Worth’s freeze profile sets it apart from most Texas markets.
- About 29 freeze nights per year, twice San Antonio. NOAA 1991-2020 normals for the DFW airport station (USW00003927) show an annual average of 29.2 nights when the minimum temperature falls below 32 F. That is sustained winter exposure, not a once-a-decade risk. Supply lines in uninsulated attics, garages, and exterior walls face this every cold season. [source]
- Winter Storm Uri: the defining regional freeze event. In February 2021, Winter Storm Uri pushed Dallas-Fort Worth temperatures to record lows for multiple consecutive days, bursting pipes across Tarrant County and leaving millions of North Texans without water. Uri demonstrated that Fort Worth's infrastructure can be overwhelmed by a prolonged hard freeze, and that the follow-on call volume can make emergency service harder to reach. [source]
- Slab-on-grade over expansive clay. Fort Worth sits on the Blackland Prairie, a belt of expansive montmorillonite clay that stretches across North and Central Texas. Most homes here are built on slab-on-grade foundations, not basements, and the clay swells and shrinks with seasonal moisture changes, stressing supply lines that run under and through the slab. That soil behavior is the same root cause that makes slab leaks a recognized local repair across the DFW market. [source]
- Local plumber wages run about 4% below the national median. The Dallas-Fort Worth-Arlington metro median wage for plumbers is $61,250, versus $63,800 nationally, so the base labor rate on a burst pipe repair trends slightly below the national figure. [source]
Local facts for Fort Worth are cited inline above. Figures are 2026 and vary by home, scope, and access.
What moves the price
- Access to the split. An exposed pipe in a garage or utility area is the cheap end. A burst inside a finished wall, ceiling, or under a slab means opening and closing the surface, which can add far more than the pipe fix.
- Emergency timing during a freeze. In Fort Worth, cold-snap call surges are real. During a regional freeze event, plumber availability tightens and response times extend, which can push effective costs up even before the rate multiplier applies.
- How far the water traveled. Nearly the whole cost of a burst can be the water it released. A burst that runs while a homeowner is away, or while the main is frozen open, drives cleanup and restoration well past the plumbing line item.
- Multiple freeze-related failures. A hard freeze can crack several runs at once. If a plumber finds more than one failure point, the repair expands, and at some level a partial or full repipe is the better economic choice.
The water damage is usually the bigger bill
On most burst-pipe jobs the plumbing repair is the smaller number. Once a supply line splits, water keeps running until someone closes the main, and drying out, tearing out soaked material, and restoring finishes is where the money goes. Cleanup and restoration commonly add $1,000 to $5,000 or more, and a burst that saturates a finished interior can exceed that. If you still have a frozen line that has not burst yet, see our guide on frozen pipes and what to do to thaw it safely before it splits.
When recurring bursts argue for a repipe
A single burst on an otherwise sound system is a repair. In Fort Worth, a home that has had more than one freeze-related burst, or multiple slab leaks on aging copper, is telling you the pipe system needs more than another patch. A partial or whole-house repipe generally runs $3,800 to $14,400 at the local wage index, and our repair-versus-replace guide lays out when patching stops making economic sense.
Permits and licensing in Fort Worth
Permit: A burst pipe repair in Fort Worth generally needs a city plumbing permit, a general plumbing permit is required for pipe repairs that alter the system; fee varies by scope (verify at fortworthtexas.gov/development-services). Fort Worth adopts the International Plumbing Code and requires a plumbing permit for water heater replacements and pipe repairs. The city fee schedule is published at the Development Services department; verify current fees before work begins. (Fort Worth fee schedule)
Verify your plumber: Plumbing contractors in Fort Worth are licensed by the Texas State Board of Plumbing Examiners (TSBPE). Before you hire, confirm the license is current and in good standing at the board’s license-verification page. Verification is free; any site charging for it is not the board.
Compare with other Fort Worth jobs
If a freeze cracked a line under the slab rather than in a wall, see slab leak repair cost in Fort Worth. If repeated bursts suggest a full system replacement, see whole-house repipe cost in Fort Worth. For the national picture, start with our burst pipe repair cost guide.
Burst pipe repair cost in other places we cover
Same job and the same method, with different local wages, permit rules, and pipe eras behind the number. For the national picture the local figures are built from, see our burst pipe repair cost guide.
Burst pipe repair cost in Kansas City, MO
About $600 to $2,400, wage-indexed to the Kansas City, MO-KS metro (1.19) and cross-checked against published local price pages.
See the Kansas City range →Burst pipe repair cost in Oklahoma City, OK
About $475 to $1,900 for the plumbing work alone, wage-indexed to the Oklahoma City, OK metro (0.93) and cross-checked against published local price pages.
See the Oklahoma City range →Burst pipe repair cost in Omaha, NE
About $500 to $2,000 for the plumbing work alone, wage-indexed to the Omaha, NE-IA metro (0.99) and cross-checked against published local price pages.
See the Omaha range →Every city and state we publish local figures for is listed on our plumbing cost by city and state index.
Related national cost guides
The national ranges behind the Fort Worth, TX figures above, and the jobs that most often come up alongside burst pipe repair.
Frozen pipes: what to do
How to thaw a line safely, and how to stop the next cold snap from bursting one.
See the range →NationalRepipe a house cost
What it costs when one burst turns out to be the third in the same system.
See the range →NationalWater heater replacement cost
What a replacement runs when a hard freeze takes the heater out with the pipes.
See the range →When does this happen where you live
The nearest NOAA station to Fort Worth is FT WORTH MEACHAM FLD NAAF. In an average year it records 3.1 below 20°F and 30 below freezing, and its median first freeze falls on November 24.
First-freeze dates for any ZIP code · How many cold nights your ZIP gets · Frost line depth by state
NOAA NCEI U.S. Climate Normals, 1991-2020, retrieved 2026-09-09.
Get quotes from local pros
Angi is a national marketplace for home services. You describe the job, and plumbing contractors who work in your area contact you with their own quotes. Requesting quotes is free and you are never obliged to hire anyone.
Angi pays us a referral fee for a completed service request. The fee comes from Angi, not from you, and it does not change the cost figures on this page.
Is this covered by a home warranty?
A home warranty is an annual service contract that pays to repair or replace covered home systems and appliances when they fail from normal use, in exchange for a monthly premium and a fixed service fee per visit. It does not cover a failure that has already happened or a fault that existed before the plan started, so it only helps if it is in place before the breakdown.
Choice Home Warranty pays us a referral fee for a quote request made through this link. You pay nothing extra. We do not sell warranties and we are not an insurer.
Sears Home Services offers home warranty plans and appliance repair nationwide.
Common questions
Fort Worth burst pipe questions
How much does it cost to fix a burst pipe in Fort Worth?
The plumbing work on an accessible burst supply pipe in Fort Worth typically runs $475 to $1,900, and simpler exposed fixes can start near $150. Priced by length, plumbers charge roughly $150 to $240 per linear foot once labor and materials are combined. The larger cost is the water damage the burst leaves behind, which is a separate line. These are our national burst pipe figures adjusted for local plumber wages; see our methodology.
Does Fort Worth see many burst pipes from freezing?
Yes, and more than most Texas cities. Fort Worth averages about 29 nights per year below 32 degrees F (NOAA 1991-2020 normals for the DFW station), compared to about 14 nights in San Antonio. Supply lines in uninsulated attics, garages, and exterior walls are vulnerable every winter, not just in exceptional years. Winter Storm Uri in February 2021 was the worst recent event: multi-day hard freezes drove Tarrant County temperatures to record lows and caused widespread pipe failures across the region.
Why does an emergency burst pipe repair cost more in Fort Worth?
After-hours and weekend emergency calls typically carry a rate multiplier of 1.5x to 2x plus a flat service fee of $100 to $300, regardless of city. In Fort Worth, the high volume of simultaneous freeze-related calls during a cold snap, as the area saw during Uri, can stretch plumber availability and push wait times or emergency rates higher. The Fort Worth plumber wage index (0.96 versus the national median) keeps baseline rates slightly below average, but emergency premiums follow the same pattern everywhere.
Do I need a permit for burst pipe repair in Fort Worth?
A repair that alters or replaces a section of pipe generally needs a plumbing permit from Fort Worth Development Services under the International Plumbing Code. Fee varies by scope; verify with the city before work begins. Your licensed plumber normally pulls the permit. Confirm the plumber’s license is current with the Texas State Board of Plumbing Examiners before any work starts.
When should a Fort Worth burst pipe be repiped instead of repaired?
When the same line bursts more than once, or when a hard freeze has stressed multiple runs at once, repeated spot repairs can cost more over time than replacing the affected section or the whole system. A full repipe generally runs $3,800 to $14,400 in Fort Worth at the local wage index. Our repair-versus-replace guide covers when patching stops making sense.
Get a real number for your repair
Get a Fort Worth burst pipe repair quote.
Compare quotes from independent, licensed plumbers, and ask each to separate the pipe repair, any emergency or after-hours fee, and the water-damage cleanup so you can see where the cost lives. Free to you.
Free to you. PlumbingRepairCost connects homeowners with independent, licensed plumbers who pay us — that never changes what you pay. We are not a plumbing contractor and we do not dispatch emergency crews.
How to get an honest price
Start with the range. Use the cost tables here to learn the national range and what moves the price for your job.
Get it in writing. Ask two or three licensed plumbers for an itemized quote that separates parts from labor.
Compare like for like. Confirm the scope, warranty, and permit before you compare totals.
Every cost figure on this site is cited to current industry cost data. We do not set prices and we take no payment from you.