Home / Repipe a house cost / Florida, FL
Cost by state
Cost to repipe a house in Florida (2026)
The short answer
Repiping a house in Florida typically costs about $3,300 to $12,500, with PEX running roughly 30 to 40 percent below copper. Florida’s median home dates to around 1990, which falls squarely in the polybutylene-pipe era, so aging supply lines and corroding cast-iron drains are common reasons local plumbers recommend a full repipe. These are our national repipe figures adjusted for Florida plumber wages. See how we localize a range.
Florida repipe cost by home size and material
| Job | Typical cost | Notes |
|---|---|---|
| 2 bath, 1,200–1,800 sq ft | $3,300–$9,100 | National $4,000–$11,000 at the FL wage index (0.83) |
| 3 bath, ~2,000 sq ft (PEX) | $5,000–$8,300 | National $6,000–$10,000 adjusted for Florida wages |
| 3 bath, ~2,000 sq ft (copper) | $6,600–$12,500 | National $8,000–$15,000 adjusted for Florida wages |
| Drywall repair after | $800–$2,500 | National $1,000–$3,000; commonly quoted separately |
| Plumbing permit | varies by city | Typically from $50–$150 base plus surcharges |
Sources: National repipe ranges (our parent page), O*NET local wages 47-2152, Florida state median (verified 2026-09-03), Census ACS B25035, Florida state median year built (verified via Census Reporter API). Figures are 2026 national ranges and vary by region, scope, and access.
We did not collect Florida-specific repipe quotes; few Florida plumbers publish whole-house repipe prices. These figures are the national cited ranges multiplied by the Florida wage index (0.83), which keeps them consistent with the national picture. Home size, material choice, and wall access move the number far more than state does.
Why Florida repipe costs differ from the national baseline
Four verified local facts explain the cost picture here.
- Polybutylene-era housing stock. The median Florida home was built around 1990 (Census ACS table B25035), which falls squarely in the polybutylene-pipe era of roughly 1978 to 1995. Many homes from this window still have original gray polybutylene supply lines that become brittle over time and fail at fittings, making a full repipe a common recommendation once spot repairs stop holding. [source]
- Cast-iron drain systems in pre-1975 homes. Florida has a large stock of homes built before 1975 that used cast-iron drain, waste, and vent pipe. These systems corrode from the inside over decades. When the drains start failing, a plumber may recommend replacing the entire drain system alongside or instead of the supply lines, which adds scope and cost. [source]
- Florida plumber wages run about 17% below the national median. The state median annual wage for plumbers, pipefitters, and steamfitters (O*NET/BLS occupation 47-2152) in Florida is $52,910, versus $63,800 nationally. That labor difference is why localized Florida repipe ranges come in below the national average. [source]
- Florida licenses plumbing contractors through the DBPR. The Department of Business and Professional Regulation (DBPR) issues Certified Plumbing Contractor (CPC) and Registered Plumbing Contractor licenses. Confirm any plumber’s license is current and active at the DBPR license search before the job begins. Municipalities may also require a plumbing permit for a repipe, with fees varying by city. [source]
Local facts for Florida are cited inline above. Figures are 2026 and vary by home, scope, and access.
What moves the price in Florida
- Pipe material. PEX is typically 30 to 40 percent cheaper installed than copper. In Florida, the freeze-resistance advantage of PEX matters less, but the price difference still makes it the most common choice.
- Home size and stories. More square footage, more bathrooms, and a two-story layout all add pipe run length and labor hours. Florida has a large stock of single-story slab homes, which can simplify some runs but limits rerouting options.
- Whether drains are also failing. Pre-1975 Florida homes with cast-iron drains may need drain system replacement alongside supply repiping. Getting a combined quote up front avoids a second mobilization.
- Wall and slab access. Open drywall is quick to work in. Supply lines run through concrete slabs or behind tile add time and restoration cost regardless of state.
Permits and licensing in Florida
Permit: A whole-house repipe in Florida requires a plumbing permit from the local municipality. Permit fees vary by city; many jurisdictions base fees on the value or scope of the work, commonly starting at $50 to $150 plus surcharges. Your licensed plumber normally pulls the permit and schedules the inspection.
Verify your plumber: Plumbing contractors in Florida are licensed by the Department of Business and Professional Regulation (DBPR) as Certified Plumbing Contractor (CPC) or Registered Plumbing Contractor. Before you hire, confirm the license is current and in good standing at the DBPR license-search page. Verification is free; any site charging for it is not the board.
Florida city pages and related guides
For city-specific cost ranges in Florida, see our pages for repipe cost in Jacksonville and repipe cost in Tampa. If a single slab leak is the trigger rather than widespread pipe failure, see slab leak repair cost. For the national picture, start with our whole-house repipe cost guide.
Repipe a house cost in other places we cover
Same job and the same method, with different local wages, permit rules, and pipe eras behind the number. For the national picture the local figures are built from, see our repipe a house cost guide.
Repipe a house cost in Jacksonville, FL
About $3,700 to $13,800, wage-indexed to the Jacksonville, FL metro (0.92) and cross-checked against published local price pages.
Also in FL →Repipe a house cost in Tampa, FL
About $3,300 to $12,300, wage-indexed to the Tampa-St. Petersburg-Clearwater, FL metro (0.82) and cross-checked against published local price pages.
Also in FL →Repipe a house cost in Las Vegas, NV
About $3,800 to $14,100, wage-indexed to the Las Vegas-Henderson-North Las Vegas, NV metro (0.94) and cross-checked against published local price pages.
See the Las Vegas range →Repipe a house cost in San Antonio, TX
About $3,600 to $13,700, wage-indexed to the San Antonio-New Braunfels, TX metro (0.91) and cross-checked against published local price pages.
See the San Antonio range →Repipe a house cost in California
About $4,600 to $17,100, wage-indexed to the California state median (1.14), with the state pipe-era context behind it.
See the California range →Every city and state we publish local figures for is listed on our plumbing cost by city and state index.
Related national cost guides
The national ranges behind the Florida figures above, and the jobs that most often come up alongside whole-house repipe.
Slab leak repair cost
Whether a spot repair under the slab makes more sense than replacing the whole supply system.
See the range →NationalBurst pipe repair cost
What a single failed line costs to fix when the rest of the pipe still has life in it.
See the range →NationalToilet installation cost
What resetting or replacing fixtures adds once the supply lines are open.
See the range →Get quotes from local pros
Angi is a national marketplace for home services. You describe the job, and plumbing contractors who work in your area contact you with their own quotes. Requesting quotes is free and you are never obliged to hire anyone.
Angi pays us a referral fee for a completed service request. The fee comes from Angi, not from you, and it does not change the cost figures on this page.
Common questions
Florida repiping questions
How much does it cost to repipe a house in Florida?
A whole-house repipe in Florida typically costs about $3,300 to $12,500, with a common 2,000-square-foot home landing near $5,000 to $8,300 in PEX and $6,600 to $12,500 in copper. Drywall repair afterward often adds $800 to $2,500 and is commonly quoted separately. These are our national repipe figures adjusted for Florida plumber wages; see our methodology.
Why do Florida homes often need a repipe?
The median Florida home was built around 1990 (Census ACS B25035), which squarely spans the polybutylene-pipe era of roughly 1978 to 1995. Homes from that window may still have original gray polybutylene supply lines prone to cracking. Older pre-1975 homes in the state often have cast-iron drain systems corroding from the inside. Either condition can make a full repipe more economical than repeated patch repairs.
PEX or copper for a Florida repipe?
PEX typically costs 30 to 40 percent less installed, handles Florida’s high humidity well, and installs faster with fewer joints. Copper has a long track record and some buyers prefer it. Both are code-compliant statewide. Florida does not have a hard-freeze concern, so the freeze-resistance advantage of PEX is less of a factor here than in colder states; the decision usually comes down to price and pipe access.
Do I need a permit to repipe a house in Florida?
Yes. A whole-house repipe is major plumbing work and requires a permit in Florida municipalities. Permit fees vary by city: they are typically based on the value or scope of the work, with many cities starting at $50 to $150 for a basic plumbing permit plus surcharges. Your licensed plumber normally pulls the permit. Florida plumbing contractors are licensed by the DBPR; confirm the license is current at the DBPR license search before the job begins.
Does Florida plumber labor run above or below the national average?
Florida plumber wages run below the national median. The state median annual wage for plumbers, pipefitters, and steamfitters (O*NET/BLS, 47-2152) is $52,910, compared with $63,800 nationally. That roughly 17 percent labor discount is reflected in our localized ranges, which is why Florida repipe costs come in below the national average despite material prices being similar.
Get a real number for your repair
Get a Florida whole-house repipe quote.
Compare itemized quotes from independent, licensed Florida plumbers, and make sure each states the material, the fixture count, and whether drywall repair is included. Free to you.
Free to you. PlumbingRepairCost connects homeowners with independent, licensed plumbers who pay us — that never changes what you pay. We are not a plumbing contractor and we do not dispatch emergency crews.
How to get an honest price
Start with the range. Use the cost tables here to learn the national range and what moves the price for your job.
Get it in writing. Ask two or three licensed plumbers for an itemized quote that separates parts from labor.
Compare like for like. Confirm the scope, warranty, and permit before you compare totals.
Every cost figure on this site is cited to current industry cost data. We do not set prices and we take no payment from you.